- Baterie i akumulatory
- Elementy indukcyjne
- Elementy półprzewodnikowe
- Czujniki
- Elementy dysktretne
- Mikrokontrolery
- Przełączniki
- Układy scalone
- Zarządzanie energią
- Cyfrowe potencjometry
- Czujniki temperatury
- Kontrolery mocy
- Moduły DC-DC
- Oświetlenie i wyświetlacze
- PMIC
- Pozostałe
- Przełączniki mocy
- Regulatory AC/DC Power Integrations
- Regulatory DC/DC
- Regulatory DC/DC Power Integrations
- Regulatory liniowe LDO
- Stabilizatory napięcia
- Sterowniki MOSFET
- Terminatory DDR
- Układy nadzorcze
- Ładowarki baterii
- Zestawy uruchomieniowe
- Komunikacja
- LED
- Przekaźniki
- Rezonatory filtry i źródła częstotliwości
- RFID
- Wyświetlacze
- Zasilacze impulsowe
Ważne informacje
BELK 3.0.0 Zestaw Deweloperski dla modułów SoM Bora oraz Bora Xpress firmy DAVE Embedded Systems

Firma DAVE Embedded Systems zaprezentowała zaktualizowaną wersję zestawu deweloperskiego BELK (Bora Embedded Linux Kit) w wersji 3.0.0, która przynosi aktualizację bootloadera U-Boot (2014.07-belk-3.0.0) oraz samego Linuxa (3.17.0-bora-3.0.0), wraz ze wsparciem dla modułu Bora Xpress SoM należącego do serii ULTRA line - najlepiej wyposażonych oraz najwydajniejszych modułów z oferty firmy DAVE.
Poniższe tabele wyjaśniają różnice między dwoma modułami:

Procesor | Xilinx Dual ARM Cortex-A9 ZYNQ XC7Z010/ZC7Z020 @ 800 MHz |
Pamięć | |
Cache | 32 Kbyte instruction, 32 Kbyte data, 512 Kbyte L2 for each core |
SDRAM | up to 1GB DDR3 @ 533 MHz |
NOR | Bootable SPI NOR 8, 16, 32 MB |
NAND | All sizes, on request |
Interfejsy | |
LAN | Gigabit Ethernet 10/100/1000 Mbps |
UART | Up to 2x UART ports |
USB | Up to 2x 2.0 OTG ports |
CAN | Up to 2x CAN |
Debug | JTAG IEEE 1149.1 Test Access Port |
PC Card | Up to 2 x SD/MMC card |
Other | Up to 2x I2C channels |
FPGA | |
Model | Artix-7 |
Logic cells | 28K to 85K |
LUTs | 17K to 53K |
Flip Flops | 35K to 100K |
RAM | 240KB to 560KB |
DSP Slices | 80 to 220 |
Differential pairs | up to 34 differential pairs for high freq. interfaces |
Nadzór | On board power supply supervision and power sequencer |
Wymiary | |
Connectors | 3 x 140 pins 0.6mm pitch |
Physical | 70 mm x 50 mm |
Temperature | Commercial (0°C / +70°C) |
Zasilanie | |
Input | 3.3V, voltage regulation on board FPGA banks can be supplied externally |
Software | |
Bootloader | U-Boot |
Multitasking | Linux 3.xx |

Procesor | Xilinx Dual ARM Cortex-A9 ZYNQ XC7Z015/ZC7Z030 @ up to 1GHz | |
Pamięć | ||
Cache | 32 Kbyte instruction, 32 Kbyte data, 512 Kbyte L2 for each core | |
SDRAM | up to 1GB DDR3 @ 533 MHz | |
NOR | Bootable SPI NOR 8, 16 MB | |
NAND | All sizes, on request | |
Interfejsy | ||
LAN | Fast Ethernet 10/100/1000 Mbps | |
UART | up to 2x UART ports | |
USB | up to 2x 2.0 OTG ports | |
CAN | up to 2x CAN | |
Debug | JTAG IEEE 1149.1 Test Access Port, CoreSightTM, PTM | |
PC Card | Up to 2 x SD/MMC card | |
Other | Up to 6x I2C channels | |
FPGA | ||
Model | Artix-7 (Z-7015) | Kintex-7 (Z-7030) |
Logic cells | 74K | 125K |
LUTs | 46K | 78K |
Flip Flops | 92K | 157K |
RAM | 380KB | 1.060KB |
DSP Slices | 160 | 400 |
Differential pairs | up to 4 PCI Express gen2 | |
Nadzór | On-board power supply supervision and power sequencer | |
Wymiary | ||
Connectors | 3 x 140 pin 0.6mm pitch | |
Size | 85 mm x 50 mm | |
Temperature | Commercial (0°C / +70°C) | |
Zasilanie | ||
Input | 3.3V, on-board voltage regulation | |
FPGA banks | PSU can be provided externally | |
Software | ||
Bootloader | U-Boot | |
Multitasking | Linux 3.x.x | |

























